| Specifications |
| Processor / Cache |
CPU |
 |
Supports up to two Intel® 64-bit Xeon® processors of the same type |
|
Quad-Core Intel Xeon processor 5400/5300 sequence (Harpertown /
Clovertown processor) up to 3.16 GHz |
|
Dual-Core Intel Xeon processor 5200/5100 sequence (Wolfdale/
Woodcrest processor) up to 3.40 GHz |
|
| System Bus |
1333 / 1066 MHz system bus |
| Operating System Software |
|
Red Hat® Linux® 5.0 & 5.1 |
|
Fedora® Core 6 ? 8 |
|
SuSE® Linux 10.3 |
|
SuSE SLES10 SP1 |
|
VMware® ESX 3 & 3.5 |
|
| System Memory |
Memory Capacity |
|
Eight 240-pin DIMM sockets |
|
Supports up to 32 GB 667 / 533MHz DDR2 ECC FB-DIMM memory |
|
Dual branch memory bus |
|
Memory must be populated in pairs |
|
Memory Mirroring supported |
|
| Memory Type |
667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM
72-bit, 240-pin gold-plated DIMMs w |
| DIMM Sizes |
512 MB, 1GB, 2GB, 4GB |
| On-Board Devices |
SATA |
|
Intel ESB2 SATA 3.0Gbps Controller |
|
RAID 0, 1, 5, 10 support (Windows Only) |
|
RAID 0, 1, 10 support (Linux) |
|
| SAS |
|
Adaptec AIC-9410 Serial-Attached SCSI (SAS) Controller |
|
SAS Dual-Channel (internal) |
|
Each SAS channel supports up to 4 SAS / SATA drives for a total of up to
8 SAS or SATA hard drives |
|
Host RAID 0, 1, & 10 support |
|
| RAID |
Support for Zero-Channel RAID with Optional Card |
| IPMI |
|
Support for Intelligent Platform Management Interface v.2.0 |
|
200-pin IPMI slot (SIMLP) as option |
|
| Network Controllers |
|
Intel (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller |
|
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
Intel I/OAT support for fast, scaleable, and reliable networking |
|
| Graphics |
ATI ES1000 controller with 16 MB of video memory
|
| I / O |
Winbond 83627HG chip |
| Input / Output |
SAS |
|
8 SAS / SATA ports Serial ATA |
|
Six Serial ATA ports |
|
Six SATA hard drives supported |
|
| IDE |
|
Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF (compact flash) card |
|
Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
| Floppy |
1 Floppy controller; 1.44 MB |
| LAN |
2x RJ45 LAN ports |
| USB |
|
4x USB rear ports |
|
6x USB internal header |
|
10 total USB ports, 2.0 Compliant |
|
| Audio |
|
High Definition 7.1 Channel Audio |
|
Line-in / Line-out / Microphone Ports |
|
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Port / Header |
|
1 Fast UART 16550 serial port |
|
1 header |
|
| Parallel Port |
1 ECP / EEP parallel port |
| Chassis |
Form Factor |
4u Rackmountable / Tower |
| Expansion Slots |
PCI-Express |
|
1 (x16) PCI-e slot |
|
1 (x4) PCI-e (using x16) |
|
| PCI-X |
2x 64-bit 133/100MHz PCI-X (3.3V) slots |
| PCI |
2x 32-bit 33MHz PCI (5V) slots |
| System BIOS |
BIOS Type |
8MB Flash EEPROM with Phoenix® BIOS |
| BIOS Features |
|
Plug and Play (PnP) |
|
DMI 2.3 |
|
PCI 2.2 |
|
ACPI 1.0 / 2.0 |
|
ACPI 1.0 (limitied) |
|
USB keyboard support |
|
Hardware BIOS Virus protection |
|
| Management |
Software |
|
Optional IPMI (Intelligent Platform Management Interface) 2.0 |
|
SuperDoctor III |
|
Watch Dog |
|
NMI |
|
| Power Configurations |
|
ACPI / ACPM Power Management |
|
Main Switch override mechanism |
|
Wake-On-Ring (WOR) header |
|
Wake-On-LAN (WOL) header |
|
CPU Fan auto-off in sleep mode |
|
Power-on mode for AC power recovery |
|
Internal / External modem remote ring-on |
|
Suspend to RAM (STR) |
|
| PC Health Monitoring |
CPU |
|
Monitors for CPU Cores, +,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset |
|
CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
|
| FAN |
|
Eight 4-pin fans |
|
8x fans with tachometer monitoring |
|
Status monitor for speed control |
|
Status monitor for on/off control |
|
Support for 3-pins |
|
Low noise fan speed control |
|
Pulse Width Modulated (PWM) fan connectors |
|
| Temperature |
|
Monitoring for CPU and chassis environment |
|
CPU thermal trip support |
|
Thermal control for 8x fan connectors |
|
PSU I2C temperature sensing logic |
|
Thermal Monitor 2 (TM2) support |
|
| LED |
|
CPU / System Overheat LED |
|
Suspend-state indicator LED |
|
+5V Standby alert LED |
|
| Other Features |
|
Chassis intrusion detection |
|
Chassis intrusion header |
|
SDDC support |
|
| Dimensions |
Height |
7.0" (178mm) |
| Width |
17.2" (437mm) |
| Depth |
25.5" (648mm) |
| Gross Weight |
63 lbs (28.6kg) |
| Color |
Black |
| Front Panel |
Buttons |
|
Power On/Off button |
|
System Reset button |
|
| LEDs |
|
Power LED |
|
Hard drive activity LED |
|
2x Network activity LEDs |
|
System overheat LED / fan fail LED |
|
| Ports |
2x USB ports |
| Drive Bays |
Hot-swap |
8x SAS Hot-swap Drives |
Peripheral Bay(s)
[90º Rotatable] |
|
2x 5.25" Peripheral Drive Bay |
|
1x 5.25" Bay For Floppy Drive |
|
| Peripheral Drives |
Floppy |
Panasonic® 3.5" 1.44MB Floppy Drive |
| SAS / SATA Backplane |
SC743 SAS / SATA Backplane w/ Enclosure Management |
| System Cooling |
Fans |
|
2x 8cm Hot-swappable PWM cooling fans |
|
1x 9cm Hot-swappable rear exhaust PWM fan |
|
2x Active heatsink w/ heatpipe |
|
| Power |
Supply |
865W AC power supply w/ PFC |
| Voltage |
100 - 240VAC, 50-60Hz, 12-6 Amp |
